Bravo McWilley 5 Posted August 10, 2012 Just wanted to chime in here and comment to the guy asking for tips on painting. Everything the others have said is very good advise. Follow that but here are a couple other tips: 1. Primer - I use cheap Colorplace flat spray paint that you can pick up from Walmart for a couple dollars a can. Shake Very very well before use and spray lightly 6-8 inches away. Start the spray to the right or left of the model, not directly on the model, so that you are spraying nothing and then sweep the can across the model and stop the spray at the other side beyond the model. This ensures an even coat and you will likely have to do a few passes but watch that you are not covering too much. Overspray will kill the details, just practice a bit. When done priming, turn the can upside down and spray at nothing until there is no paint coming out. This keeps the nozzle clean and prevents paint from building up on it and making it not useful for next spray session. 2. Primer color does affect the final model a bit. Black primer gives models a duller tone and makes things darker. I also like black for the fact that you can leave the primer in the deep areas between 2 colors for a black line of separation which is nice. White makes the model brighter, you will likely need to do the black "outlining" yourself with white. Grey is neutral. I like to use black for monsters and white for heroes giving them different looks. Monsters typically, like zombies and the like, should be darker, while heroes I like to showcase bright colors. If your monster is made of fire or the light, like the Air Elemental, then white is the best primer…Just put a bit of thought into it and you will realize what primer color to use. 3. Many people use expensive paint like the Reaper paints, etc, that have been mentioned here. Those are great paints and if you can afford it then go for it. They are worth it, but its not necessary. If your on a budget and just begining, you may not want to shell out $100 in paints. I personally use acrylic water based paints in the small plastic bottles you can get from Walmart for about 99 cents a piece. Brands like Folk Art, Creamcoat and Craft Essentials are all at Walmart for cheap. The big difference between good quality paint and the cheap ones i mention is that paint is a liquid meduim with colored granuals mixed in. The finer the paint "grains" the better the paint. The expensive paints have very fine grains, while the cheap paints are less fine, so there is something to be said for getting better paint, but I have never had an issue either way. What you will run into though is the thickness of the paints. the expensive paints are very fine and spread easily in thin coats, while the craft paint from walmart will be usually very thick right out of the bottle almost to the point where you cant use it very well like it is provided. This is easily fixable, see #4 4. Thinning paint. You want your paint to be the thickness of milk. Too thick and it will be tough to apply and cover details, too thin and it runs everywhere and seeps into grooves. Too thin paints can be good sometimes if your looking to do a wash, but that's another story. You will want to thin your paints, but DO NOT use just water to thin them. Water has a tension to it that makes the paint not flow right. Adding just a single drop of dish soap liquid to a pint or so of water will break the water tension and give you a better thinning solution. Now here is another trick, instead of making your own thinner, I picked up a bottle of windshield washer fluid, the blue stuff. This is essentially the same thing: water and a tiny bit of soap. The blue color does not affect the paint and you can thin even whites with it without color change. Its cheap and premade. Just place a little in a small bowl and your paint in a another plastic area. Add just a drop or two at a time of the thinning material to your paint and stir. Keep adding until the paint is the thickness of milk. Getting your paint the right thickness will improve your painting way more than you think it would. 5. Shadows and Highlights. Your models are tiny and the details are not big enough to provide color variation for shadows and highlights on its own. You need to add this yourself during painting. You should have at least 3 "layers" of paint for every section of color you do. Lets take a cloak for example. Our cloak is red but adding just base red will look funny and amaturish. Add a dark brown, black, or opposing color from the color wheel (green for red) to the red to make a shadow color first. Use this darker red and coat the entire area in a nice even smooth coat. What we want to do is leave the recessed areas this darker color, but cover all the red area in this color. Then get your base red color (base color is based on the cloaks color…may not be red from out the bottle and could be mixed for some other shade of red) and paint the cloak, leaving the darker red color in the recesses and only painting the red on the medium and top areas. Darker in the folders and red everywhere else covering up the darker red with the base red on these areas. Then mix a lighter color for your highlights and paint those on the very outermost, or highest places of the cloak. You will get the hang of this but it gives the model depth. You may want to try dry brushing this final highlight layer or not, it depends on the area. hair is great for dry brushing, while smooth areas, like cloaks, are better painted. 6. Lastly, make sure to always, ALWAYS, use flat paint, flat primer and flat seal coating. Gloss is a no-no IMHO and makes the model not look right. Of course there are exceptions, but I have never used gloss and never will. When complete, use a flat matte clear spray can to cover the model using the same spray technique described above. Do at least 3-4 light coats and let dry between each coat. Quote Share this post Link to post Share on other sites
Coldmoonrising 12 Posted August 11, 2012 Just finished this now. The picture didn't come out as good as I like but it gets the point across. These figures look much better in person then my droid Razr can show them. Quote Share this post Link to post Share on other sites
Coldmoonrising 12 Posted August 12, 2012 This guy was such a pain to paint. I'm glad he's over. I look forward to trying him out in D2e though. Quote Share this post Link to post Share on other sites
Triu 2 Posted August 12, 2012 Coldmoonrising said: Just finished this now. [bogran the Shadow]Must be a member of the Squat Team. Quote Share this post Link to post Share on other sites
Coldmoonrising 12 Posted August 13, 2012 Got another one done last night, didn't have time to post the pic though till now. Quote Share this post Link to post Share on other sites
skolo 6 Posted August 13, 2012 I`m not pro, but started painting my monsters. Some of the results below Quote Share this post Link to post Share on other sites
skolo 6 Posted August 13, 2012 …and finished Merriod or whatever this fish thing is, photos tomorrow Quote Share this post Link to post Share on other sites
Coldmoonrising 12 Posted August 13, 2012 Skolo, I saw your paitings over of BBG's site. I really like how your elementals came out, they look great. Quote Share this post Link to post Share on other sites
skolo 6 Posted August 13, 2012 Coldmoonrising said: Skolo, I saw your paitings over of BBG's site. I really like how your elementals came out, they look great. thanks , but comparing to your work…pff Quote Share this post Link to post Share on other sites
Coldmoonrising 12 Posted August 16, 2012 Finally had time to sit down and paint another figure tonight. One that would make an excellent Berserker: Quote Share this post Link to post Share on other sites
Funkychick 0 Posted August 17, 2012 You guys have inspired me to try painting. I bought paints and brushes today! Quote Share this post Link to post Share on other sites
Coldmoonrising 12 Posted August 17, 2012 Excellent! Take your time with it and be patient. My first few characters didn't come out nearly as good as my painted characters are now. Quote Share this post Link to post Share on other sites
Battlematt 0 Posted August 17, 2012 Great job on the Ettin! I'm about to start painting him myself. Going to use base colours and then wimp out and use some auto shade varnish to finish them off. Might have to put some extra effort into the Master though… Quote Share this post Link to post Share on other sites
Endevor 1 Posted August 18, 2012 This is what i have done, i am not very good at this and i used quick techniques (quickshade from Army Painter),, if i can do that everybody can. Quote Share this post Link to post Share on other sites
Eraser42 0 Posted August 18, 2012 This is my very first attempt at painting a miniature. It's super shiny due to me just hitting it with a clear coat. Will post more as I paint them. Quote Share this post Link to post Share on other sites
Coldmoonrising 12 Posted August 22, 2012 Time to revive this thread once again: Another pretty easy guy to paint but what can I say… "Karnon is Karnon." Quote Share this post Link to post Share on other sites
jcbbjjttt 0 Posted August 23, 2012 Anyone have a Varikas done? Quote Share this post Link to post Share on other sites
Coldmoonrising 12 Posted August 23, 2012 jcbbjjttt said: Anyone have a Varikas done? Yup, go to page 1, reply #3, he's in my first initially huge post with a bunch of heroes painted. With how basic his figure was, it was difficult to paint him to a level I was happy with… Quote Share this post Link to post Share on other sites
Coldmoonrising 12 Posted August 23, 2012 Still slowly chipping away at my heroes. Only 3 original Descent heroes left then its on to the Dungeon Quest Heroes, all 4 Promo Heroes, then finally D2e Heroes. Spiritspeaker Mok, now known as Mok due to Orcish copyright infringement laws. They don't play around with this sorta thing, lol. Quote Share this post Link to post Share on other sites
Butaman551 10 Posted August 26, 2012 My wife and I have been painting the monsters and I thought I would post our results so far. We are both total beginners when in comes to miniature painting and have zero background in art. In fact, the only miniatures we have painted before this were the miniatures from Last Night on Earth. So try to be a little gentle. We are using Army Painter brand Quickshade (Strong) to do all of our shading since it is incredibly simple to use and adds some extra protection at the same time. It does add an occasionally unfortunate 'brown' element to the miniatures, but it usually comes out pretty decent (in my opinion). Anyways, here we go. Quote Share this post Link to post Share on other sites
Butaman551 10 Posted August 26, 2012 Here's some more…. Quote Share this post Link to post Share on other sites
Butaman551 10 Posted August 26, 2012 And some more…. Quote Share this post Link to post Share on other sites
Butaman551 10 Posted August 26, 2012 And some more….. Quote Share this post Link to post Share on other sites