Sign in to follow this  
Followers 0
Alaric Rocha

newbie questions: counters and altitude

3 posts in this topic

 I just bought "flying aces" and two minatures.  I don't quite understand how and why to use some of the counters.  damage, smoke, fire I get, but the other counters... what are they for?  shot down a french plane?  arial photo etc????

 

when using the minatures I understand raising and lowering the plane with the cards that have red lines, but how high or low can a plane go?  i assume can not keep using cards that put us higher and higher.  And then... what's the point?  can we only fire at a plane if it's the same height?  Or same and lower same and higher?  can i dive onto someone and fire at them?

 

thank you

Alaric rocha

Share this post


Link to post
Share on other sites

 You can only fire at planes the same altitude or plus or minus 1; but in the case of a difference in 1 altitude you can only shoot up to half the ruler at the enemy plane and it is treated as if it was further than a half ruler away for damage. Altitude makes a bigger difference when there are ground objects and objectives. They can only shoot up to altitude 1 and same with planes shooting at them with the exception of bombs (note that planes can fly at altitude 0 if they have at least one climb counter).

Each plane has a max altitude and climb rate. You can find those in the "Balloon Busters" and "Miniature" rules in the support section and it will also be on a card in the deck of series 4 miniatures. Climb rate is how many times a plane needs to use the climb card in order to gain an altitude level (thats what the climb counters are used to keep track of).

Most of the other counters are for objectives. So the camera and bombs are for successful missions of those types; put the counter on the ground target to show it. The machine gun counters are for showing a trench machine gun has been silenced. I don't know if there is any point for the airplane shot down counters but it might just be for fun to show where they crashed.

Another thing altitude affects more is 2 seaters. The rear gunner has a blind spot because of the tail of the airplane if the target is at the same or lower altitude; if the target is at a higher altitude then there is no blind spot.

One more thing to remember is that climb counters don't mean anything other than how soon the plane will get to the next altitude. So for game purposes there is no difference between a plane at altitude 3 with 1 climb counter and another at altitude 3 with 4 climb counters. They are simply both at altitude 3.

Hope that helps.

Share this post


Link to post
Share on other sites

If you've just got Flying Aces, I wouldn't worry about altitude rules for now. Wait till you expand a bit and start doing ballon missions, or ground fire etc.

The other counters are used for marking scenario objectives and goals accomplished etc. I'd put those to one side as well, for the time being.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0