Jump to content
Reedmooley

Reprinted Shadow of Nerekhall minis quality

Recommended Posts

Hi there :) Anyone got a recently reprinted (end od 2017) copy of SoN expansion? Does the quality of hero and monster miniatures improved over the "melted zombie face" heroes from the ones that ware present in first production run?

Share this post


Link to post
Share on other sites

I've not seen any photo of recent reprint minis from that box either. Reprint of LotW made on the same production run as SoN have a bit better casted monster minis(less mold lines and overall smoothness), sculpts are unchanged, but details are more crisp, especially on the softer tan colored dragon hybrids. Still the original print run of LotW was of nice quality, and it was fun to paint that stuff. LotW re-release is on par with Chains that Rust or recent H&M packs quality.

 

Share this post


Link to post
Share on other sites

I got my copy in 2017 and I think thats the reprint. I don't have any reference of the old prints, but I took a picture of my hero's (unpainted) so you can see for yourself. The monster in my SoN are looking good!

GS3FAov.jpg

The major difference is the scale, those heroes are the old (smaller) scale then the new H&M and expension sets.

Hope this helps!

Share this post


Link to post
Share on other sites

Thanks TryFal, can you please check print date on the box? There is a bar code on the box right bottom side. There should be a production date as marked here:)

Przechwytywanie.JPG

Share this post


Link to post
Share on other sites
Posted (edited)
1 hour ago, Reedmooley said:

Thanks TryFal, can you please check print date on the box? There is a bar code on the box right bottom side. There should be a production date as marked here:)

Przechwytywanie.JPG

Hmmm lookt it up and mine says: 16107R, not a clue what that should mean... 16th of october...

Edited by TryFal

Share this post


Link to post
Share on other sites
6 hours ago, TryFal said:

I got my copy in 2017 and I think thats the reprint. I don't have any reference of the old prints, but I took a picture of my hero's (unpainted) so you can see for yourself. The monster in my SoN are looking good!

GS3FAov.jpg

The major difference is the scale, those heroes are the old (smaller) scale then the new H&M and expension sets.

Hope this helps!

Some pretty awful flashing on some of those.

Share this post


Link to post
Share on other sites
17 hours ago, TryFal said:

Hmmm lookt it up and mine says: 16107R, not a clue what that should mean... 16th of october...

Thx:) I dunno what that means, maybe the (20)16 July 10th. Still those minis look a bit better than the ones I've seen. And well, Tinashi and Orkell have really ugly sculpts.

Share this post


Link to post
Share on other sites
1 hour ago, Reedmooley said:

Thx:) I dunno what that means, maybe the (20)16 July 10th. Still those minis look a bit better than the ones I've seen. And well, Tinashi and Orkell have really ugly sculpts.

Yea could be. Well after reading the post of Alcovitch I looked at my copy of LoR for comparison and the quality of those mini's are better!

For me personally it's not a problem, nothing I can't fix by painting them, but I can imagine that for those who keep them this way it's a shame the quality of them is lower...

the only problem I found is the different scale between early content and new content. 

Share this post


Link to post
Share on other sites

Well- first production run had those two almost faceless, kinda melted, no noses, disfigured eyes etc. Thats why I look forward to the last printing- last LotW print run is very nice, very sharp details. Definitely better quality. Scale is of course smaller than H&M latest boxes.

Share this post


Link to post
Share on other sites
5 hours ago, TryFal said:

Yea could be. Well after reading the post of Alcovitch I looked at my copy of LoR for comparison and the quality of those mini's are better!

For me personally it's not a problem, nothing I can't fix by painting them, but I can imagine that for those who keep them this way it's a shame the quality of them is lower...

the only problem I found is the different scale between early content and new content. 

Painting doesn't hid mold lines or flashing, it will draw attention to it.

You can remove it before painting, and it's usually a pain in the ***, and looking at the shots listed above, the mold lines are in really obvious places. Poor planning was done creating the molds for these models. Not even the base game has models that awful. 

Share this post


Link to post
Share on other sites

Yeah, modeling knife, files and green stuff are your best friends here. But those SoN minis are really cheap/lousy looking, when compared to other H&M and expansion boxes stuff. Even mantic "Kings of plastic garbage"armies are better casted.  This is the only expansion I find just plain ugly in terms of miniatures. Unfortunately I don't think there is a chance to avoid that, maybe I will try to fix them somehow or get some proxys for those two. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×