Tvayumat 3,637 Posted April 3, 2018 Paint has thickness guys. I know, it seems to go on so thin it couldn't possibly matter, but even a layer of primer adds thickness to any object it is put on. This this in mind, make sure your painted movement tools are still usable, as in still fit into the movement notches on the vehicle bases. Several people have already sunk time into painting up their movement tools only to have to scrape down to plastic on the tips to make the tool usable again. Personally, I suggest a minimalist approach. Just a quick wash of black primer into the recesses of the movement tool make it look good and won't interfere with gameplay in any way. Good painting. 2 Big Easy and samuraisolomon reacted to this Quote Share this post Link to post Share on other sites
Omnustechni 120 Posted April 3, 2018 I can speak to this. I painted the bases and I noticed the movement tool did stick a bit in the notches on the ATRT. Good advice. Quote Share this post Link to post Share on other sites
Ailowynn 1,723 Posted April 3, 2018 I think the proper way is just to tape off the sides of the tool. Do the top however you want, and that way it won’t start snagging. 2 Big Easy and samuraisolomon reacted to this Quote Share this post Link to post Share on other sites
BigBadAndy 640 Posted April 23, 2018 (edited) When I painted my vehicle bases the movement tools were so tight they were scraping the paint off. I solved this by taking some 200 grit sandpaper and sanding down the edges. Most of the “tightness” comes from the top corners of the tool. For whatever reason the sides of the tools seem to bow out at the top and bottom. Anyway, ten seconds a side was plenty. Then I smoothed it out with a bit of 1500 grit so it’s not too rough to the touch. They still fit without any wobble and in a game where you can hold the thing on the air over terrain it shouldn’t make any difference. Edited April 23, 2018 by BigBadAndy 1 Force Majeure reacted to this Quote Share this post Link to post Share on other sites
