AT-ST Poses

[Patteous 112]

6 minutes ago, Bdarin04 said:

No it’s perfectly stable that way as long as it’s on a hard level surface like a table.

More of the weight sits over the planted foot than you’d think.

Could always glue a washer underneath as well just to make sure. 

[General Weiss 24]

1 minute ago, Patteous said:

Could always glue a washer underneath as well just to make sure. 

I’ve had it like that for a week now, has not fallen over once. I’d really have to try to knock it over for it to fall.

[Evad04 41]

31 minutes ago, Patteous said:

Could always glue a washer underneath as well just to make sure. 

I have washers under all my bases.. 

 

5/16” fit perfectly in small unit bases, M5x15 fit perfect in the speeder bikes

Forgot what size I got for the latge bases.  They were slightly smaller than the spot as I think it was 1.1 inch diameter and I have 1” ones glued in the center

 

[Attackmack 526]

Im gonna need something to weight my atst down, it wont fall over by itself but it doesnt need much tilt to fall forward and with such a tall model i can see it accidentally bumped easily

[Animewarsdude 3,639]

Wow, some people have some cool looking poses with their AT-STs having them mid step. Here is mine painted up, and alongside the IA AT-ST.

[Attackmack 526]

Got a good shot showing just how much my ATST is leaning forward. I happy with its pose as I think it looks like its in full sprint (or as much of a sprint an ATST can do) but the forward lean did make the model somewhat unstable. Its very tall and with center of gravity high up and far forward, leading to a model very easily tipped even on this wide base.

So I ended up gluing as many washers I could fit on the underside of the base as well as a bunch on top of the rear part of the base (covered with greenstuff to ease basing the model later). Made a huge different to the stability of the model, you can stil tip it over of course but it requires a good bit more to do so!

[Susanooo 113]

Here is mine At ST  

[Lumberjack Nick 164]

On 3/30/2018 at 6:12 AM, Bdarin04 said:

Here is mine, not quite done with th paint yet.

 

 

Yes! Think I finally found my pose. Thank you!

[Attackmack 526]

We really need a ATST catwalk

[Nihm 209]

...I'm too $e×¥ for the at-walk...

That song just pops in your head :/ lol

[mikejay70 7]

How's this?

[mini78 157]

Here's mine;

Edited April 2, 2018 by mini78

[Attackmack 526]

Another one for the ATST catwalk  

Edited April 6, 2018 by Soulless

[Attackmack 526]

On 2018-04-02 at 4:37 PM, mikejay70 said:

How's this?

Fantastic weathering!

[Attackmack 526]

Paintjob nearly done so the model is now glued together. Had to cut and grind a little to get the pose right but it worked out!

 

Edited April 7, 2018 by Soulless

[General Weiss 24]

1 hour ago, Soulless said:

Paintjob nearly done so the model is now glued together. Had to cut and grind a little to get the pose right but it worked out!

 

Love the work on the movie accurate inward narrow stance

[Yodhrin 353]

I would really, really appreciate it if someone who's posed their in a fairly neutral and upright "relaxed" stance could take a measurement in mm of the height?

[Amanal 2,557]

 

Looks like he is hunting Wabbits, Wascally Wabbits...

[chemnitz 328]

Here is mine: