TUZ LEGION LOG

[TUZ 310]

Can't.....wait.... for.... LEGION!!!

There's been some fantastic scenery on display from the FFG community and I've been inspired to get building...

The spaceport was constructed out of standard insulation foam. I find it more useful for sanding and shaping than pink / extruded polystyrene. Great curves! Just remember to wear a good quality respirator when working with the stuff!

The tissue paper canopy above the stairwell is just a proxy to give me an idea of how it could look with one modelled in.

The next step will be to model up some plasticard doorways and other gubbins... the landing bay in particular will benefit from piping and some fixtures and fittings to bring it to life...

Hope you like the work so far. Happy to answer any questions, cheers

[poke450 162]

Looks awesome!

[ABXY 1,019]

Wow! 

(puts me in mind of the Rebel Depot on Tatooine from Star Wars Battlefront) 

 

Idea for landing bay gubbins:

An access ladder for the X-Wing 

 

And a work platform for the technicians:

 

(a loading hoist for the droid might be too bulky for the available space) 

 

[Bhunter46 190]

Looks great!

[gigliopaolo 10]

Awesome stuff

[TUZ 310]

 

8 hours ago, ABXY said:

Wow! 

(puts me in mind of the Rebel Depot on Tatooine from Star Wars Battlefront) 

 

Idea for landing bay gubbins:

An access ladder for the X-Wing 

 

And a work platform for the technicians:

 

(a loading hoist for the droid might be too bulky for the available space) 

 

That's a cool idea! Would look great and can be used as cover or blocking terrain. Thinking some plasticard rodding...or at a stretch, tooth picks (cut and sanded) could be used to form the framework... ill have I have a little play around to see what could work. I have some crates and bits from TTCombat which I'll scatter in there too. I'd like to add some sort of servo/maintenance droid. Not sure if there are any models that may suit?

[ABXY 1,019]

Also, a portable power generator - like in the bottom left of the below pic - with a power conduit/coupling. 

 

[C3POFETT 833]

13 hours ago, ABXY said:

Wow! 

(puts me in mind of the Rebel Depot on Tatooine from Star Wars Battlefront) 

My thoughts exactly. That is one of my favorite maps. I am working on a Death Star interior map but the Rebel Depot and the Goazan Badlands (Cargo Map) were my next inspirations for a map. My thoughts were to make a huge Depot but leave the top open as the interior area of the building would be a big part of it, not just the docking bay.

[C3POFETT 833]

This has got to be my favorite structure built so far. This thing is totally amazing.

[TUZ 310]

I've been working on a tower. A nice big one 

The inspiration for the design came from the building you can see in the back right of this picture;

I made the building in 3 stages; top, middle and bottom, sanding and smoothing the foam until I was happy with the design and fit. Wood glue is used to attach the pieces together and works really well on this type of material.

To make the domed top, I cut away and sanded the polystyrene half-ball to around a third and then filled the resulting hole with some spare foam, sanding the piece down to create a smooth transition. I'll use filler to address any gaps and once a base coat is applied it should tie the model together.

[Dash Two 309]

Just ... wow

Very talented.  On the landing pad ... how many smaller pieces making the larger structure?  Are you using any sort of tool to help sand or all by hand/paper?

 

 

[TUZ 310]

The Tatooine gaming table needs a few moisture vaporators...

I considered a number of different materials with which to build the vaporators and the one that provided the best solution was.... Lego! 

A selection of plasticard and bits from the trusty bits box were used to add final detailing

[TUZ 310]

4 hours ago, Dash Two said:

Just ... wow

Very talented.  On the landing pad ... how many smaller pieces making the larger structure?  Are you using any sort of tool to help sand or all by hand/paper?

 

 

Cheers Dash Two! 

The landing pad was constructed out of two main blocks of 6 inch depth insulation foam. I drew out the main shape of the landing area itself directly onto the block and carved out the inner landing pad circle. Take your time at this point because it's easy for the foam to crack if you go at it too vigourosly. Once you've got the rough shape in place, switch up to a retractable bladed to achieve finer a d cleaner cuts, finally switching to a sanding block to refine and clean the finished surface. Depending on how vigourosly you sand, you can actually remove quite a bit of foam quite rapidly, or equally, achieve delicate detailing results. 

The second block was shaped and attached to the back. This is the block that contains the inner stairwell. This was carved separately and glued into place. The stairs on the side of the building are also a separate piece, as is the tower building on the top

[TUZ 310]

4 hours ago, Dash Two said:

Just ... wow

Very talented.  On the landing pad ... how many smaller pieces making the larger structure?  Are you using any sort of tool to help sand or all by hand/paper?

 

 

I've been using the following tools and equipment to make the buildings;

One of the most important bits of kit to use is a respirator! These are available in most DIY stores and start around £15 - £20 for the cheaper ones. They're invaluable for insuring you don't inhale the dust particles that come off the insulation foam when cutting and sanding. I also have a hoover next to me to help clear up all the bits and pieces that collect on the work desk. Alongside the respirator I also recommend wearing eye protectors to help limit the dust particles getting in your eyes...

Sanding wise I use a 3M sanding block / loose sanding paper and a handy sanding stick! - Basically sand paper glued to a 1cm depth ruler like length of hard wood. This has proved invaluable for the majority of sanding I've done, providing great control and enabling large flat sweeping sanding, the ability to shape good quality curves, as well as used for more accurate scoring or angled sanding...

In terms of cutting, the retractable knife has done most of the leg work. The foam can blunt blades pretty quickly so it's worth stocking up on extra blades. Other knifes and saws are also handy for bigger cuts where initial accuracy isn't needed. I also use a chisel for gouging out unwanted foam as well as smaller files for tidying up any small details, for example, around the door frames...

Cocktail sticks and bamboo skewers have proved really handy for pinning foam pieces in place whilst the glue drys. The rolling pins come in handy for wrapping sandpaper round for creating curves in things like the underside of doorways and for keeping unruly jawas in check

Edited October 18, 2017 by TUZ
Pic removal

[Force Majeure 4,108]

These are all awesome!

The precision is impressive. Did you perhaps study architecture at University level? The model reminds me of the kind that would come out of our Architecture/Landscape Architecture department.

----------------------------------------

Regarding painting, how do you prime this? Rattle cans would eat up the foam, wouldn't it?

[Dash Two 309]

The vaporators ... Occam's Razor via Lego. 

Some basic parts and, then, small technical Lego pieces.   Good thing I just donated a good 30-40 lbs of Legos to charity.  Kidding, as it went to a good cause.    

Just amazing work, as I am brand new at this and still figuring it all out.  

[ABXY 1,019]

Maaaaaaan! Phenomenal!!... Just keeps getting better. 

 

[TUZ 310]

I've made another tower for the Tatooine gaming table...

The inspiration for the design came from the model in the FFG demo table, which I believe in turn was inspired by the building in the middle of the SW movie pic below...

I like that the design stands out from the majority of dome topped buildings that are synonymous with Tatooine. It certainly has a 'castle tower' feel to it, which makes me wonder whether it's some sort of governmental or garrison type building...

A wip shot alongside a smaller building for scale. Cheers 

[chriscook 86]

amazing work  where do you get the foam from?

[TUZ 310]

21 minutes ago, chriscook said:

amazing work  where do you get the foam from?

Cheers! It's Celotex insulation board. It can be picked up from most DIY stores. There's probably quite a few other brands available, but it's the yellow, almost crumbly foam you're looking for. Extruded polystyrene (commonly known in modelling circles as pink or blue foam) is also excellent for modelling but has quite different properties due it's density (great for sharp, firm cuts etc. but less maluable for sanding purposes) ?

[TUZ 310]

16 hours ago, Dash Two said:

The vaporators ... Occam's Razor via Lego. 

Some basic parts and, then, small technical Lego pieces.   Good thing I just donated a good 30-40 lbs of Legos to charity.  Kidding, as it went to a good cause.    

Just amazing work, as I am brand new at this and still figuring it all out.  

 You're right! Sometimes the simplest solution is the answer!

Lego is great for all kinds of modelling applications and works pretty well on these vaporators. I tried lots of different stacks of pieces to see which looked good and flowed well from top to bottom. I'm happy with how they turned out. They just have a base coat on them at the moment but when I paint them and add in some weathering, they should look the ticket ?

[C3POFETT 833]

Absolutely brilliant work. I love this build more and more.

I too made moisture vaporators from Lego's and wood turnings. They are in a previous thread by Force Majeure as a building challenge.

[TUZ 310]

16 hours ago, Force Majeure said:

These are all awesome!

The precision is impressive. Did you perhaps study architecture at University level? The model reminds me of the kind that would come out of our Architecture/Landscape Architecture department.

----------------------------------------

Regarding painting, how do you prime this? Rattle cans would eat up the foam, wouldn't it?

Many thanks FM! 

I studied tech graphics, so maybe some similarities to the disciplines of design architecture. I very much enjoy model making and construction; it presents interesting challenges through design, and use of materials etc. And I find it really rewarding when the concept becomes a 3D reality ?

In terms of priming, I'll likely use a slightly watered down acrylic paint. As you say, the solvents in a spray can would likely eat into the foam (although non solvent / non foam eating sprays are available on the market). 

I know from experience the foam will soak up the first few base coats due to its porous nature. But once I have a reasonable surface to work on, I will look to airbrush all remaining coats / details. 

The other thing I'll do is add in fine sand and PVA into the base mix to provide a textured surface. I'll also experiment with some patch plastering, to try and emulate the look of the buildings in the movies. 

Cheers 

[TUZ 310]

18 minutes ago, C3POFETT said:

Absolutely brilliant work. I love this build more and more.

I too made moisture vaporators from Lego's and wood turnings. They are in a previous thread by Force Majeure as a building challenge.

Fantastic work! Just had a look and they look great! (And you've made loads, awesome ?). 

Love all your IA stuff as well 

[C3POFETT 833]

6 minutes ago, TUZ said:

Fantastic work! Just had a look and they look great! (And you've made loads, awesome ?). 

Love all your IA stuff as well 

Thanks, I just posted my Power Generator entry for the October Community Terrain Challenge. All made from "trash".

I am going full on for a totally interior build. I plan to have a modular Death Star/ Imperial Station that I can convert into a Star Killer Base interior by adding rock face walls. It will be constructed completely from foam core board and printed decals using Avery label sheets.

Edited October 19, 2017 by C3POFETT