Jump to content
Srba

Custom miniatures from Hero Forge

Recommended Posts

I don’t have any of the MoM miniatures, but I have played the game and I’d say these are about the same. I could get a pic of them next to an Imperial Assault mini tomorrow - I imagine they would be about the same scale?

As for location cards, I can do that:

Ed1Qcba.jpg

Share this post


Link to post
Share on other sites
On 1/18/2019 at 11:27 PM, mhuber said:

Thanks for posting these, I never knew this service existed.  How do they compare in size to the miniatures from Mansions of Madness 2nd ed? especially the newer ones from the expansions?  

 

 

As I said above, I don’t have Mansions of Madness, but here they are side by side with Imperial Assault minis:

D9KWlHA.jpg

Share this post


Link to post
Share on other sites

Thanks for the reply Srba.  Those look close enough in size that I'm going to order a couple for a trial.  I'll post up when they arrive along with some of the Mansions of Madness figures.  👍 

Share this post


Link to post
Share on other sites
48 minutes ago, Burgie1996 said:

Could someone design a Diana Stanley. I’ve has a go but I’m hopeless at it 

CB89pek.jpg

Just happened to have finsihed my Diana. Can’t get HF links to work on mobile, but if you can’t work out what I did from the image, I can upload the link later.

Share this post


Link to post
Share on other sites
On 2/1/2019 at 6:31 AM, houghto said:

Hi Srba

I would love to get some links to your HF designs.

Thanks Steve.

Here are a few recent ones:

Diana: https://www.heroforge.com/load_config=1273098

Joe: https://www.heroforge.com/load_config=3405219

Silas: https://www.heroforge.com/load_config=1681096

Wendy: https://www.heroforge.com/load_config=191631 (painted below)

yLzeYUO.jpg

Share this post


Link to post
Share on other sites

Nice job on Diana and Wendy!   

I'm running through Dunwich with Ashcan and Zoey right now.  I keep thinking about how nice it would be to have minis instead of the cards.  I'm going to bite the bullet and get a couple I think.  

   

Share this post


Link to post
Share on other sites
On 2/4/2019 at 6:42 AM, Srba said:

Here are a few recent ones:

Diana: https://www.heroforge.com/load_config=1273098

Joe: https://www.heroforge.com/load_config=3405219

Silas: https://www.heroforge.com/load_config=1681096

Wendy: https://www.heroforge.com/load_config=191631 (painted below)

yLzeYUO.jpg

Thanks so much!

 

Its been fun playing with the designs, i added baseball bat to Wendy  as I use it a lot!

 

Any chance i get grab some other links like Jenny, Roland & Agnes? Thanks! 

 

 

Share this post


Link to post
Share on other sites

So I’ve only ordered and painted the Roland, Jim, and Yorrick, (not as good of painter as thread originator so I’ll keep the pics to myself) but I’ve spent a fair amount of time designing all the LCG investigators plus some others.  Some are better then others (Ursula and Joe might be my favorite) and some (ashcan, Wendy) I just don’t like much at all. Here are my links for anyone interested...

Calvin Wright - https://www.heroforge.com/load_config=2323950

Agnes Baker - https://www.heroforge.com/load_config=2321672

Akachi Onyele - https://www.heroforge.com/load_config=2322491

Ashcan Pete - https://www.heroforge.com/load_config=2323883

Carolyn Fern - https://www.heroforge.com/load_config=2324443

Daisy Walker - https://www.heroforge.com/load_config=2321622

Diana Stanley - https://www.heroforge.com/load_config=3163355

Father Mateo - https://www.heroforge.com/load_config=2324257

Finn Edwards - https://www.heroforge.com/load_config=2324308

Jenny Barnes - https://www.heroforge.com/load_config=2321495

Jim Culver - https://www.heroforge.com/load_config=2323797

Joe Diamond - https://www.heroforge.com/load_config=3806860

Leo Anderson - https://www.heroforge.com/load_config=2341830

Lola Hayes - https://www.heroforge.com/load_config=2341655

Marie Lambeau - https://www.heroforge.com/load_config=3163267

Mark Harrigan - https://www.heroforge.com/load_config=2322552

Min Thi Phan - https://www.heroforge.com/load_config=2324200

Norman Withers - https://www.heroforge.com/load_config=2323484

Preston Fairmont - https://www.heroforge.com/load_config=3806922

Rex Murphy - https://www.heroforge.com/load_config=2322589

Rita Young - https://www.heroforge.com/load_config=3311961

Roland Banks - https://www.heroforge.com/load_config=2321524

Sefina Rousseau - https://www.heroforge.com/load_config=2324475

Silas Marsh - https://www.heroforge.com/load_config=2323433

Skids O’Toole - https://www.heroforge.com/load_config=2321802

Ursala Downs - https://www.heroforge.com/load_config=2324327

Wendy Adams - https://www.heroforge.com/load_config=2321748

William Yorrick - https://www.heroforge.com/load_config=2322441

Zoey Samras - https://www.heroforge.com/load_config=2321868

 

Favorite Non LCG investigators I’ve created...

Agatha Crane - https://www.heroforge.com/load_config=3819202

Charlie Kane - https://www.heroforge.com/load_config=3819087

Dexter Drake - https://www.heroforge.com/load_config=3163011

Patrice Hathaway - https://www.heroforge.com/load_config=3832545

 

Someday I’ll pull the trigger and buy the lot. And then get promptly disappeared by my wife.  😁

Share this post


Link to post
Share on other sites

First off, these are brilliant. I particuarly like that I can download the .stl files and import to blender and further modify the poses to my tastes and assign material slots to put some textures on in Unity.

 

I do think you should increase their height though, otherwise they look a little dumpy. Pics speak for themselves. The height for males is 9 and females 8.

 

Rex - https://www.heroforge.com/load_config=191631

Ashcan - https://www.heroforge.com/load_config=3935924

Finn - https://www.heroforge.com/load_config=3955998

Skids - https://www.heroforge.com/load_config=3917883

Daisy - https://www.heroforge.com/load_config=3939629

William - https://www.heroforge.com/load_config=3939570

 

Will post more tomorrow

 

 

Share this post


Link to post
Share on other sites

I love the Heroforge minis. I also started augmenting the STL files before resin printing. Such as a cross in one of Zoey's hands...actually give Ashcan a real guitar instead of a ukelele... giving Marie a retro microphone on a stand...and Jim Culver a trumpet.  But I have to disagree on height. As 30mm mini, they actually come out proportional. Increasing them to 8 or 9 is your choice. But they are now stylized and not proportional in size. 

Share this post


Link to post
Share on other sites

Having minis definitely help up the table presence of the game.  I like anything that stops the game from just looking like piles of cards and tokens everywhere.  At even the $15 price tag these HF sculpts are pricey to collect though not unreasonable for miniatures to be honest.  Also they look great.

I already have an entire Mansions Of Madness collection otherwise I would considering picking up some HF stuff for the game.  I like the MoM 2nd system fine and I also use the minis and tiles for CoC RPG sessions.  So I'm definitely getting my use out of them.  The MoM minis that they updated for 2nd edition like Finn, Marie, Agnes, Wendy, Jim, Silas, Diana, Tommy, Lily, Wilson, Akachi and Charlie are all fantastic.  Unfortunately many of the earlier 2nd ed releases were just the legacy sculpts which were not great.  They are serviceable, but it's a pain to paint them such that they look good.  That's a real missed opportunity to update the whole line.  Also for completionists MoM still doesn't have all the current LCG investigators released.  No Mark, Leo, Rex, Ursula, Norman, Daisy, Lola, Sefina, Zoey, Skids, Roland, Yithians or Calvin.  Also while it's cheaper per model to get MoM stuff than HF stuff you are getting a bunch of stuff you won't really use in the LCG so I can't recommend it unless you plan on actually playing MoM or using those other components for RPGs or something else.

I don't recommend hunting down the legacy FFG prepaints at this point since they are unlikely to come back into print, are of lesser quality than the newer sculpts FFG are releasing, have mediocre to bad paint jobs, and are ridiculously overcosted by speculators since they are currently OOP(they use to be just a couple bucks each which was very reasonable for a prepaint).  You are better off getting these HFs at that point or some of the CoC stuff RAFM put out.

Share this post


Link to post
Share on other sites
2 hours ago, phillos said:

... No Mark, Leo, Rex, Ursula, Norman, Daisy, Lola, Sefina, Zoey, Skids, Roland, Yithians or Calvin.

Ha! I never considered getting a few Yithian figs; we just used the regular ones for the transformed investigators. But now I'm off to shop 'em.

Share this post


Link to post
Share on other sites
Posted (edited)

Bringing up to date Mark Harrigan and Diana Stanley from The Feeders from Within.. Pic quality isn't great, but I'm charging my camera atm, this was taken with my phone :(

 

pic4651948.jpg

Edited by bern1106

Share this post


Link to post
Share on other sites
On 1/1/2018 at 2:41 PM, Srba said:

Completed Agnes this evening:

s45Mg7v.jpg

8gMYyj3.jpg

Probably my favourite so far

This Soda Pop Miniature would make SPM/ND jealous.   I really  like the paint details on the coke bottles.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...