Jump to content
Sign in to follow this  

A base for my station (finally!)

Recommended Posts

So I finally got round to making a stand for my station model, just a simple 70mm balsa square with a balsa stem (with support at base), the same width as the bottom gap of the station, so it can fit snugly onto it. Also printed out a stat card for it to be placed over the top of the base for use in my WIP campaign. (The hull value of which I changed to "6" before print).

The station squeezes onto the balsa wood stem and stays firmly, so I can remove the station and change the card if needed.





Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...