Jump to content
Sign in to follow this  
Ogrekin

One problem...

Recommended Posts

So, I have run "A Day Late a Shilling short" about 8 times now and have read the main rulebook about 3 times.  It has not been abused at all, but the pages are now falling out of the binding!  What can I do about this?  Is anyone else having this issue?

 

Share this post


Link to post
Share on other sites

Weird, I've been wearing mine out and it looks good as new. There's a crease on the left hand edge of the cover. I bent that back and limbered up the crease right away so it wouldn't pull it away from the binding when I opened the book.

Someone mentioned they had theirs 'spiral bound' at a copy shop. Might want to look into that since it's already loose.

 

Share this post


Link to post
Share on other sites

Not sure about the 3-rd ed books (still waiting for them llorando.gif)

But I can tell You what I usually do to all my soft cover books, before I even open them.

You will need some mini drill (1-2 mm in diameter), needle and thread.

I take the book, and make 6 holes (on the line where book bents): 2 at the top of the book, 2 in the middle, 2 at the bottom.

Each pair of holes is about 150 mm between them.

Then I take the needle and thread, and saw those holes up.

Result: no more falling pages.

Share this post


Link to post
Share on other sites

Sunatet said:

Not sure about the 3-rd ed books (still waiting for them llorando.gif)

But I can tell You what I usually do to all my soft cover books, before I even open them.

You will need some mini drill (1-2 mm in diameter), needle and thread.

I take the book, and make 6 holes (on the line where book bents): 2 at the top of the book, 2 in the middle, 2 at the bottom.

Each pair of holes is about 150 mm between them.

Then I take the needle and thread, and saw those holes up.

Result: no more falling pages.

 

Could you please add images to your explenation ?

Share this post


Link to post
Share on other sites

Sunatet said:

Not sure about the 3-rd ed books (still waiting for them llorando.gif)

But I can tell You what I usually do to all my soft cover books, before I even open them.

You will need some mini drill (1-2 mm in diameter), needle and thread.

I take the book, and make 6 holes (on the line where book bents): 2 at the top of the book, 2 in the middle, 2 at the bottom.

Each pair of holes is about 150 mm between them.

Then I take the needle and thread, and saw those holes up.

Result: no more falling pages.

Nice idea, those will for sure hold.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...