Jump to content
Sign in to follow this  
SemperSarge

Nebulon-B Frigate for X-Wing

Recommended Posts

Why I would like to see a Neb-B in X-Wing I doubt it will happen. One of the reasons they made the Raider rather then use the Lancer class Frigate in X-Wing is the Lancer is too big and the Nebulon-B is significantly larger then the Lancer.

Share this post


Link to post
Share on other sites

I prefer Mel's version to Space Rocks.  The Space Rocks version just looks a little... off to me.  Being 3D printed, Mel's version is far more expensive, but it's also far more detailed and in my opinion looks more "official" and accurate to the film. 

 

Rebel-Fleet_zpszztkhyz3.jpg

 

As for FFG producing one themselves; very unlikely I'd imagine, for the reasons RogueCorona gives.  The Raider seems to be the practical size limit for an X-Wing game, and Armada is there for anything larger.

 

That said, if FFG did produce an official one themselves - even if it was only a special edition or for scenery purposes -  I'd buy it!

Edited by FTS Gecko

Share this post


Link to post
Share on other sites

Thank goodness we won't see a Lancer Frigate.

Still a chance for the Correlian Gunship though.

The Acclamator would probably fill the entire playmat if they ever made one to scale.

Going by same scale as corvette and frigate, frigate is twice the length of corvette, acclamator would be 3 times the length of same vette so not terrible, but not practical.

CorGun would be in my opinion the best bet, with lancer, frigage and assassin corvette as outliers.

Share this post


Link to post
Share on other sites

I don't know if the canon and legends lengths are the same but in Legends an Acclamiator is a little over 5 times the length of a CR90 and 2.5 times the length of a Neb-B. And like I mentioned earlier the designers said the Lancer which is one third the length of an Acclamiator is too big. The DP20, also known as the Corellian Gunship could show up though.

 

I don't think there is an official length for the Arquitens but my best guess from watching the Clone Wars is that she would just barely fit in the under 200 meters long bracket.

Share this post


Link to post
Share on other sites

Entirely possible. I used wookieepedia, so as a source it's not ideal. <readread>

 

In fact yes, I was using the width - Sorry!

 

This means two things:

 

A: The Acclamator is a real fatass of a ship, with it's arse end being wider than 3 corvettes.(feel free to add a your momma joke here).

and B, even this ship is way too huge for scaling. Which is a shame as I love the Clam.

Edited by DariusAPB

Share this post


Link to post
Share on other sites

Where's your data come from because the specs I've seen say the length is 752m while the width is 450m. Are you sure you didn't just get the length and width numbers mixed up?

Not only that - but a later book - Incredible Vehicles - written for TCW - scales the Acclamator up - to 891m.

Share this post


Link to post
Share on other sites

Entirely possible. I used wookieepedia, so as a source it's not ideal. <readread>

 

In fact yes, I was using the width - Sorry!

 

This means two things:

 

A: The Acclamator is a real fatass of a ship, with it's arse end being wider than 3 corvettes.(feel free to add a your momma joke here).

and B, even this ship is way too huge for scaling. Which is a shame as I love the Clam.

Yo corvette so far when it goes into orbit the planet circles it.

Share this post


Link to post
Share on other sites

 

Where's your data come from because the specs I've seen say the length is 752m while the width is 450m. Are you sure you didn't just get the length and width numbers mixed up?

Not only that - but a later book - Incredible Vehicles - written for TCW - scales the Acclamator up - to 891m.

 

 

Wow. The Acclamator just went from shaped like a Star Destroyer to a Star Destroyer in all but name then. I wonder is it slightly longer then the Munificent now or did they get scaled up as well? In Legends the Munificent was about five percent narrower then the Acclamator but almost ten percent longer.

Share this post


Link to post
Share on other sites

Not a big fan of the current ship cards. IMHO it should have been 3 sections not two. The model looks nice though. Enough of a feel good scale compared to the CR-90 but not too large to play on tabletop.

 

Still I am hoping for a Star Destroyer model. Also why is this off-topic?

Edited by Marinealver

Share this post


Link to post
Share on other sites

 

Wow. The Acclamator just went from shaped like a Star Destroyer to a Star Destroyer in all but name then. I wonder is it slightly longer then the Munificent now or did they get scaled up as well? In Legends the Munificent was about five percent narrower then the Acclamator but almost ten percent longer.

 

Everything got scaled up a bit - including the Venator - and one ship got scaled up a lot (the Recusant-class Commerce Guild Destroyer). The version of the Providence class seen in the show (huge - twice the length of a Venator - consistently called Separatist Dreadnought) is explicitly a different class from the Invisible Hand seen in RotS - a "cruiser-carrier" rather than a "carrier-destroyer"  - the Invisible Hand is still only 1088m long in modern reference works.

 

Providence-class carrier-destroyer in Complete ICS: 1188 meters

"Separatist Dreadnought" in  Clone Wars Incredible Vehicles : 2,177 meters

 

Venator-class Star Destroyer in Complete ICS = 1,137 meters

Venator-class Star Destroyer in Clone Wars Incredible Vehicles = 1,155 meters

Lucrehulk-class Battleship in Complete ICS = 3,170 (diameter incidentally)

Lucrehulk-class Battleship in Clone Wars: Incredible Vehicles = 3,356 (length)

Recusant-class light destroyer in Complete ICS = 1,187 meters

Recusant-class light destroyer in Clone Wars Incredible Vehicles  = 2,544 meters

Munificent-class Star Frigate in Complete ICS = 825 meters

Munificent-class Star Frigate in Clone Wars Incredible Vehicles = 1,199 meters

 

However - newcanon works (Star Wars: Absolutely Everything You Need To Know) have restored the Venator to its original size (1137m) - though the Databank has not yet been updated and uses the 1155m figure. It's possible that some others may be changed as well, when lengths start appearing in the Databank for those ships not yet listed.

Edited by Ironlord

Share this post


Link to post
Share on other sites

Remembers all the fun times he has had either commanding or serving on a Nebulon-B in RPGs and sighs.

 

"The Nebulon-B is still my favorite canon Star Wars ship class though I;m hoping some of the Legends designs that I like more then it become canon eventually"

Edited by RogueCorona

Share this post


Link to post
Share on other sites

Just purchased the Nebulon-B from Space Rocks. I'm hoping to eventually run an Age of Rebellion game where my players command a Nebulon-B. It will be great to do that and use all the FFG X-Wing game miniatures.

Same here!

I'm planning 12 X-Wings, 6 Y-Wings, 3 A-Wings and 3 B-Wings to be based on the Nebulon-B. But the ship itself in X-Wing would be more of an Empire objective rather than actually used as an Epic ship.

Share this post


Link to post
Share on other sites

Hi guy's.    I bought the space rocks neb-b. was told that it would be posted end of sept.   still waiting and NO replies through e-bay, e-mail or their own website.    anyone know whats going on??

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...