Goreshde 0 Posted June 21, 2015 I have a ship with Ador Tallon that has the squad command and the squad token. After I resolve the squad command I flip a squad over to not being activated yet. Can I then spend the token on my ship to activate the squad again? Quote Share this post Link to post Share on other sites
Edsel62 306 Posted June 21, 2015 No, because Adar Tallons ability is used to toggle a squadron after you have resolved a Squadron Command, not a Squadron activation. If you use a dial and a token they are a single Squadron Command with +1 to your effective Squadron value. When another ship uses a Squadron Command within range that squadron can be activated again or when you get to the Squadron Phase that squadron can be activated again. Quote Share this post Link to post Share on other sites
clontroper5 4,233 Posted June 22, 2015 It would be noted that if you just the token(no command dial) you can still toggle the slider but as me.tuoned above if you use both you can only toggle one 1 Edsel62 reacted to this Quote Share this post Link to post Share on other sites
KommissarK 209 Posted June 22, 2015 (edited) It should be pointed out that a ship can only perform 1 of each command per ship activation. See the timings section in the RRG. You can spend both a dial and token at the same time, but you can't spend the same dial and token at different times to trigger the same command multiple times during an activation. Edited June 22, 2015 by KommissarK 4 Smuggler, Gibbobobo, Ghost Dancer and 1 other reacted to this Quote Share this post Link to post Share on other sites
