Jump to content
SirWillibald

SirWilli's Workshop: X-Wing 2.0 stuff

Recommended Posts

24 minutes ago, SirWillibald said:

****, your right! My bad, but I think there might be a typo on the ship cards from the conversion kit (that's where I took the names from).

Do the SWZ07 ship cards actually say "TIE/in Interceptor" and not "TIE Interceptor"?

Actually this is a pretty big snafu on FFG's part. Just checked: the Quick Build and Points List documents and conversion kit Pilot cards all have it as 'TIE Interceptor' as you did, BUT the maneuver dials and the ship selection menu in the FFG Squad Builder both have it as 'TIE/in Interceptor'! :O

I can't see anyone really arguing the point except to be a complete a-hole, but doesn't that mean Rules-As-Written there isn't actually such a thing as a legal dial for the Interceptor!?

Share this post


Link to post
Share on other sites
17 hours ago, SirWillibald said:

Dividers ready for download, no fancy photo yet, but everything's there. As I've said, the style is very reduced, but they work fine for me. Available in both portrait and landscape orientation.

http://sirwillibald.com/games/x-wing-miniatures-games/carddividers/

 

Thank you very much!

EDIT:

Actually, I'm having some trouble.  The file is a zip collection of jpeg, no big deal - but the real issue is I do not seem to be able to print them...... 😞

Any advice is appreciated.

Edited by thatdave

Share this post


Link to post
Share on other sites
1 hour ago, thatdave said:

Thank you very much!

EDIT:

Actually, I'm having some trouble.  The file is a zip collection of jpeg, no big deal - but the real issue is I do not seem to be able to print them...... 😞

Any advice is appreciated.

I'm going to need to figure this out too, as I can't spend a page of cardstock to print one divider.

Maybe add them to a Word document and print them through there?

Share this post


Link to post
Share on other sites
51 minutes ago, SirWillibald said:

Adding in Word should work, will give it a try later! Sorry for the inconvenience, but making printable sheets for each faction requires some time investment, that I can't spare at the moment... 🙈 

And yes, I forgot the tech relay thing, thanks for the hint! 

No worries.  As I lack the skills to create stuff like this, I highly appreciate it when someone else does.  This will make my life so much easier.

Share this post


Link to post
Share on other sites
2 minutes ago, papy72 said:

No worries.  As I lack the skills to create stuff like this, I highly appreciate it when someone else does.  This will make my life so much easier.

Agree wholeheartedly - thanks again SirWillibald!

Share this post


Link to post
Share on other sites

I'm printing out the new microhangars and gearboxes and i noticed that your T-65 MicroHangar is for 01 and 12 (core set and expansion).  Technically, the expansion x-wing is a little different - doesnt have the 5 pips on the wings.

Sorry to nitpick and thanks again for making these!

 

Share this post


Link to post
Share on other sites
3 hours ago, sirjorj said:

I'm printing out the new microhangars and gearboxes and i noticed that your T-65 MicroHangar is for 01 and 12 (core set and expansion).  Technically, the expansion x-wing is a little different - doesnt have the 5 pips on the wings.

Sorry to nitpick and thanks again for making these!

 

Hrmpf. Didn't notice, sorry, have to think about it if there's a way to reflect this on the lid... 

Share this post


Link to post
Share on other sites

Printed and laminated my dividers last night, they look great! Slightly too tall for my box, but I'll either trim down the bottom or score a fold near the top so they fold over the cards, haven't decided yet. Luckily I can practice as I stupidly printed out dividers I have no use for (eg, Tech despite owning no Tech upgrades)!

One issue - what you have as 'Elite' upgrades are in proper 2.0 nomenclature 'Talent' upgrades.

Oh and if you're contemplating minor tweaks to the files like the X-Wing paint job, you could also add the 2.0 product codes to the Saw's Renegades (SWZ02 IIRC), and TIE Reaper (SWZ03 IIRC) MH and GB; they are listed in the Quick Build pdfs on FFG's website.

 

One last thought, it'd be useful to have some faction dividers for slots with faction-specific upgrades, i.e. Rebel, Resistance or Republic only Astromechs, etc. Rather than specific to each upgrade type, seven simple dividers with a small tab with just the faction logo (maybe even cascade from left to right) would work great for any upgrade type that's worth subdividing. Does that make sense? If it's not something you're interested in making I'll have a bash myself.

Share this post


Link to post
Share on other sites

Oh, Talent it is... You're right, will change this. 

Adding the SKU might be a good idea, will have a look. 

And a set of seven cascading sub dividers is already done, simply forgot to add them... Stay tuned for the weekend, no time until then... 

 

Share this post


Link to post
Share on other sites
9 hours ago, SirWillibald said:

Hrmpf. Didn't notice, sorry, have to think about it if there's a way to reflect this on the lid... 

I only brought it up because I know that with the first edition boxes you handled the alternate paint jobs with some little indicator.

Share this post


Link to post
Share on other sites
On 3/28/2019 at 2:15 PM, SirWillibald said:

Oh, Talent it is... You're right, will change this. 

Adding the SKU might be a good idea, will have a look. 

And a set of seven cascading sub dividers is already done, simply forgot to add them... Stay tuned for the weekend, no time until then... 

 

Ha, thought I was clever but you were way ahead of me. Cool.

Personally I keep Condition cards with the upgrade or pilot that assigns them, but someone might want a Condition divider?

 

BTW my newly organised card box with your dividers got some appreciation from my X -Wing group last night, and definitely made for quicker setup. :)

Edited by rawbean

Share this post


Link to post
Share on other sites
2 hours ago, Gberezowsky said:

Awesome work, as always. BTW, I didn’t see the tie aggressor in the dividers. 

Me neither... Forgot it... 🙈 

3 hours ago, rawbean said:

Ha, thought I was clever but you were way ahead of me. Cool.

Personally I keep Condition cards with the upgrade or pilot that assigns them, but someone might want a Condition divider?

Already done, as well... Stay tuned... 

Share this post


Link to post
Share on other sites

unbena17.jpg

Ok, updated the dividers, they now include:

- TIE Aggressor
- V-19 Torrent
- Conditions
- Remotes
- seven sub dividers for faction specific upgrades
- bugfixes (Talent, minor artwork bugs)

Feel free to bother me with further mistakes, it's quite easy to fix them. :)

And feel free to share my little advertising graphic  😉

Edited by SirWillibald

Share this post


Link to post
Share on other sites

I couldn't wait so I took the Tie Reaper as a base to create GearBoxes for older ships that now use the new medium bases. I also did the Sith Infiltrator. Here are the PDF files.

https://drive.google.com/drive/folders/1srCpFP_8qhPpWnbtQ35FiyCAxmWN5QMQ

sirwillibald.com is awesome. I appreciate the work he has put into these Microhangars and GearBoxes. My entire XWing Collection is stored as such.

Thanks, sirwillibald!

Share this post


Link to post
Share on other sites

Thanks to SirWillibald I am a storage nut with my miniatures.  Once I got started, I could not stop myself.  So, I made MicroHangars and GearBoxes for Wave 3.  They aren't perfect, like what SirWillibald would make.  But they will do until official ones come out.  Also, I expanded the slotted Tuckbox for the T-65 Promo Damage Deck.  Works like a charm.  Enjoy!

https://drive.google.com/drive/folders/1srCpFP_8qhPpWnbtQ35FiyCAxmWN5QMQ

PS - The Belbullab MicroHangar is using the A-Wing dimensions and is too big.  Problem is I can't find my engineering calipers.  Its driving me crazy.

 

Republic.jpg

Separatists.jpg

Tuckbox-Slotted-Promo.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...