Jump to content
Sign in to follow this  
aadh

X-Wing Storage, Evolved and Scalable (Picture-heavy)

Recommended Posts

Finally satisfied with my storage solution. It should have the flexibility and uniformity to survive at least a few more expansions.

 

1x Battlefoam P.A.C.K. 720

2x Battlefoam P.A.C.K. 216

3x Stanley 25-Removable Compartment Professional Organizer 

2x Stanley 10 Removable Bin Compartment Deep Professional Organizer

 

Stanley solution courtesy of xBino's thread from BGG.

 

The stack:

 

IMG_20150214_135724222.jpg

 

Token tray:

IMG_20150214_135842661.jpg

 

Upgrades tray:

IMG_20150214_135947829.jpg

 

Ship token tray with mission tokens:

IMG_20150214_140028890.jpg

 

Pilot cards, bases, and stands:

IMG_20150214_140111946.jpg

 

(Edit: Didn't include the second deep tray which just contains extras: number tokens, TL, card sleeves and foam bits)

Edited by aadh

Share this post


Link to post
Share on other sites

The P.A.C.K. 720 contains the fleet.

Rebel squadrons:IMG_20150214_140322987.jpg

 

Rebel squadrons:

IMG_20150214_140355488.jpg

 

Rebel large with in-progress YT-1300 gunship:

IMG_20150214_140503577.jpg

 

Imperial squadrons:

IMG_20150214_140434142.jpg

 

Imperial large:

IMG_20150214_140553925.jpg

 

Epic: 

IMG_20150214_140702042.jpg

 

2x GR-75 separated by a thin layer of foam; tokens, bases, stands and epic-only cards in the lower section. Damage cards in tuckboxes beneath the CR-90.

Edited by aadh

Share this post


Link to post
Share on other sites

The green P.A.C.K 216 contains the table tray and dials:

IMG_20150214_140930891.jpg

 

Range templates are from Applied Perspective. Two each range-3, range-2, and range-1, and a single range-5, all hand-painted. Beneath are the cardboard range rulers. 

 

Custom tuckboxes for the straight maneuver templates, two sets. Custom damage deck holders from scavenged Ultra Pro deckboxes.

 

IMG_20150214_141050966.jpg

 

Dials need to be sorted and labeled, but I was excited to finally have something I was comfortable with.

 

The black P.A.C.K. 216 will be used for the Epic tray once Scum arrives. I'll be getting a second black 216 for my two Raiders.

Edited by aadh

Share this post


Link to post
Share on other sites

At first glance, I was going to ask how much it all cost, but then I saw how many ships you have and I realized that it probably didn't matter... :)

Nice work.

 

Yeah. If you want to go all Stanley containers like xBino, the cost would be pretty reasonable.

Share this post


Link to post
Share on other sites

Epic: 

IMG_20150214_140702042.jpg

 

2x GR-75 separated by a thin layer of foam; tokens, bases, stands and epic-only cards in the lower section. Damage cards in tuckboxes beneath the CR-90.

 

That's an interesting idea for the epics. How much vertical foam are you using there? 4"? I figure the CR-90 requires a minimum of 3", and the GR-75s require 2" each.

Share this post


Link to post
Share on other sites

Only one CR-90? Slacker :)

 

I know. I'm not sure how likely it is that I'll get a second. Definitely two Raiders, though.

 

 

...you have 18 TIE Fighters...

 

...AND 18 Interceptors...

 

Make no mistake, I'm almost 100 points of everything (some more, some less) and, yes, Epic, but... ****, dude!

 

And I play solo exclusively, not much for competitive play. It's more of a collector/cinematic thing for me.

 

 

Sooo your the reason for the shortage...

Nice set up!

 

I could admit to being the shortage for the American mini sleeves by FFG, if nothing else. I bought 15 packs a couple of weeks ago. My bad.

Share this post


Link to post
Share on other sites

 

Epic: 

IMG_20150214_140702042.jpg

 

2x GR-75 separated by a thin layer of foam; tokens, bases, stands and epic-only cards in the lower section. Damage cards in tuckboxes beneath the CR-90.

 

That's an interesting idea for the epics. How much vertical foam are you using there? 4"? I figure the CR-90 requires a minimum of 3", and the GR-75s require 2" each.

 

 

It's actually just 3". The CR-90 fits perfectly with the engine section being almost exactly 3". No issues there at all. The GR-75 are pretty tight with a 1/4" strip of foam between them, maybe a millimeter or two above the edge, but that's mitigated by the 1/4" topper. You can probably tell I meant to have a GR-75 on each side, but this works out okay for now.

 

The GR-75 may be 2 inches tall (not sure), but it's not a flat brick, either. If they're facing opposite ways and supported carefully, they fit together just fine.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...