Jump to content
Sign in to follow this  
MacrossVF1

Storm Commando Escort Carrier

Recommended Posts

It is finally finished! The Storm Commando Escort Carrier is finished! Took me only about five weeks.

 

Now I know we have a sub-section for painting and conversions but as I suspected before it was introduced, it just isn't visited as often as the main section. Therefore I will post in both sections.

 

I apologise for the substandard pictures but at about 42-43 cm/17inch long it is a rather big beast. In fact it's so big that my normal photo equipment just wasn't enough. I had to improvise with a big assortment of lamps and a bedsheet just to be able to get some decent pictures. In any case, enjoy!

 

SCECfin1.jpg

 

SCECfin2.jpg

 

SCECfin3.jpg

 

SCECfin4.jpg

 

SCECfin5.jpg

 

SCECfin6.jpg

 

SCECfin7.jpg

Edited by MacrossVF1

Share this post


Link to post
Share on other sites

Forgot to post some stats yesterday.

 

Length: 42-42cm / 17 inch

Width : 15cm / 6 inch

Height: 9cm / 3 inch

 

Built in an assumed scale of about 1/600 (slightly above 250m) though that is very much up for debate.

 

It has three pairs of turrets, all of which can be turned and aimed though I don't recommend playing overly much with them, there is always a risk that the paint will be damaged..

 

15 magnets has been built into the model to make the turrets both removable and turnable, and of course to make it possible to separate the model in two halves for easier transport and storage.

Share this post


Link to post
Share on other sites

Forgot to post some stats yesterday.

 

Length: 42-42cm / 17 inch

Width : 15cm / 6 inch

Height: 9cm / 3 inch

 

Built in an assumed scale of about 1/600 (slightly above 250m) though that is very much up for debate.

 

It has three pairs of turrets, all of which can be turned and aimed though I don't recommend playing overly much with them, there is always a risk that the paint will be damaged..

 

15 magnets has been built into the model to make the turrets both removable and turnable, and of course to make it possible to separate the model in two halves for easier transport and storage.

So if I forward your name to the icp you can finally answer their question.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...