Jump to content

Commander Klank

Members
  • Content Count

    68
  • Joined

  • Last visited


Reputation Activity

  1. Like
    Commander Klank got a reaction from SFC Snuffy in MC80b "Mon Remonda" (Mel Miniatures)   
    Pro Tip... if you get the ship in FUD be sure to set it out in good direct sunlight for about 6 to 8 hours... this helps to completely cure the FUD material (they use ultra violate light to cure the material after the print) and leaches out the last of the oils that seep from the material.  And no, to won't' melt; I take my stuff to work and leave it on a paper towel on the dashboard of my car all day long in the Texas sun. It turns the material from clear to milky white and removes the oil resin from the model so painting it isn't as complicated as it can sometimes get with FUD. When I do this the paper towel always has an oil stain under it... which is why I use paper towels on my dashboard. I then scrub my stuff in simple green with hot water. Here is a simple test. Before you sun treat it rub you finger over a large flat area of the model; you'll feel the slippery oil on it... after you sun treat it and clean it off that area should fell squeaky clean. 
    Trust me on this. I do tons of stuff in FUD for a few years now... ships and 15mm tanks.
    15mm FUD tank... E-100
    FUD Imperial Cruisers
  2. Like
    Commander Klank got a reaction from Dameon13 in MC80b "Mon Remonda" (Mel Miniatures)   
    Pro Tip... if you get the ship in FUD be sure to set it out in good direct sunlight for about 6 to 8 hours... this helps to completely cure the FUD material (they use ultra violate light to cure the material after the print) and leaches out the last of the oils that seep from the material.  And no, to won't' melt; I take my stuff to work and leave it on a paper towel on the dashboard of my car all day long in the Texas sun. It turns the material from clear to milky white and removes the oil resin from the model so painting it isn't as complicated as it can sometimes get with FUD. When I do this the paper towel always has an oil stain under it... which is why I use paper towels on my dashboard. I then scrub my stuff in simple green with hot water. Here is a simple test. Before you sun treat it rub you finger over a large flat area of the model; you'll feel the slippery oil on it... after you sun treat it and clean it off that area should fell squeaky clean. 
    Trust me on this. I do tons of stuff in FUD for a few years now... ships and 15mm tanks.
    15mm FUD tank... E-100
    FUD Imperial Cruisers
  3. Like
    Commander Klank got a reaction from cynanbloodbane in MC80b "Mon Remonda" (Mel Miniatures)   
    Pro Tip... if you get the ship in FUD be sure to set it out in good direct sunlight for about 6 to 8 hours... this helps to completely cure the FUD material (they use ultra violate light to cure the material after the print) and leaches out the last of the oils that seep from the material.  And no, to won't' melt; I take my stuff to work and leave it on a paper towel on the dashboard of my car all day long in the Texas sun. It turns the material from clear to milky white and removes the oil resin from the model so painting it isn't as complicated as it can sometimes get with FUD. When I do this the paper towel always has an oil stain under it... which is why I use paper towels on my dashboard. I then scrub my stuff in simple green with hot water. Here is a simple test. Before you sun treat it rub you finger over a large flat area of the model; you'll feel the slippery oil on it... after you sun treat it and clean it off that area should fell squeaky clean. 
    Trust me on this. I do tons of stuff in FUD for a few years now... ships and 15mm tanks.
    15mm FUD tank... E-100
    FUD Imperial Cruisers
  4. Like
    Commander Klank got a reaction from RyonOlson in MC80b "Mon Remonda" (Mel Miniatures)   
    Pro Tip... if you get the ship in FUD be sure to set it out in good direct sunlight for about 6 to 8 hours... this helps to completely cure the FUD material (they use ultra violate light to cure the material after the print) and leaches out the last of the oils that seep from the material.  And no, to won't' melt; I take my stuff to work and leave it on a paper towel on the dashboard of my car all day long in the Texas sun. It turns the material from clear to milky white and removes the oil resin from the model so painting it isn't as complicated as it can sometimes get with FUD. When I do this the paper towel always has an oil stain under it... which is why I use paper towels on my dashboard. I then scrub my stuff in simple green with hot water. Here is a simple test. Before you sun treat it rub you finger over a large flat area of the model; you'll feel the slippery oil on it... after you sun treat it and clean it off that area should fell squeaky clean. 
    Trust me on this. I do tons of stuff in FUD for a few years now... ships and 15mm tanks.
    15mm FUD tank... E-100
    FUD Imperial Cruisers
  5. Like
    Commander Klank got a reaction from DampfGecko in Nemesis Star Destroyer   
    Base model is the Star Wars™ SnapTite® Build and Play Imperial Star Destroyer by Revell
    https://www.revell.com/model-kits/entertainment/85-1638.html#.WsbaMGeouUk
    I use the bridge from Mels ISD 1 conversion kit. This bridge design and size was used on all Imperial ships ISD size or larger.
    https://www.shapeways.com/product/YLQ9P2PZ4/armada-imperial-star-destroyer-i-mod-kit?optionId=59918502
    allot of the turrets are from here...
    https://www.shapeways.com/shops/spacesupplydepot
    and here...
    https://www.shapeways.com/shops/einargosric
    Dome and other bits form here...
    https://www.shapeways.com/product/PXMTCRLJB/mulcien-ship-parts?optionId=42962753&li=ostatus
    Your around $100 with that stuff... 
    Here is my first ship the Leviathan class Star Destroyer Leviathan next to a ISD and a Victory . These ships are about 3200 meters 
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/16425882_1378291658901389_5582425903134458144_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEHUVtBw9LiMngKoUzcahPbVQWJwxfTtIAGbq34oTPq8Rt9Lhxt0Mc6vbBqnxgI9KZdDb_ESPK3VSVK4bj7CfiTRZD6x0LeYaoOdVkqshyGLQ&oh=f46fb28d93d81676e01cdace8af2d6c8&oe=5B693D8A
  6. Like
    Commander Klank got a reaction from eViL dAvE in Nemesis Star Destroyer   
    Base model is the Star Wars™ SnapTite® Build and Play Imperial Star Destroyer by Revell
    https://www.revell.com/model-kits/entertainment/85-1638.html#.WsbaMGeouUk
    I use the bridge from Mels ISD 1 conversion kit. This bridge design and size was used on all Imperial ships ISD size or larger.
    https://www.shapeways.com/product/YLQ9P2PZ4/armada-imperial-star-destroyer-i-mod-kit?optionId=59918502
    allot of the turrets are from here...
    https://www.shapeways.com/shops/spacesupplydepot
    and here...
    https://www.shapeways.com/shops/einargosric
    Dome and other bits form here...
    https://www.shapeways.com/product/PXMTCRLJB/mulcien-ship-parts?optionId=42962753&li=ostatus
    Your around $100 with that stuff... 
    Here is my first ship the Leviathan class Star Destroyer Leviathan next to a ISD and a Victory . These ships are about 3200 meters 
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/16425882_1378291658901389_5582425903134458144_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEHUVtBw9LiMngKoUzcahPbVQWJwxfTtIAGbq34oTPq8Rt9Lhxt0Mc6vbBqnxgI9KZdDb_ESPK3VSVK4bj7CfiTRZD6x0LeYaoOdVkqshyGLQ&oh=f46fb28d93d81676e01cdace8af2d6c8&oe=5B693D8A
  7. Thanks
    Commander Klank got a reaction from impspy in ISD-1 Modification from Mel's   
    Pro tip: It's the resin oil from uncured FUD material. They cure the stuff in ultra violet light after printing. This is not always 100% so let the parts sit in direct sun light for at least an hour or two... this cures the FUD resin all the way trough and sweats out any remaining oils from the material. Then wash the parts in simple green and rinse in hot water. 
    Trust me on this...
  8. Like
    Commander Klank got a reaction from SFC Snuffy in Nemesis Star Destroyer   
    From Revell ISD model.... top side construction...
    https://scontent-dfw5-1.xx.fbcdn.net/v/t31.0-8/29745081_1826514217412462_2853910105721409187_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeHc12xwgntXHAcMPkghPWC8y4A75ad8PIg1coqN4SKOZJMexKoNTwoYEx2Lr0_heSPcJiEFvfYTWrw_lWPlixhhTAmxMvWuPfVBkuoEKWol6w&oh=d5c2c8c89d6b3be5a73243879052bb5e&oe=5B632832
    https://scontent-dfw5-1.xx.fbcdn.net/v/t31.0-8/29749495_1826514377412446_7546833167886130094_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEZkXC3utOFfpixf_DrCMLAEd8Ml3xIfb7FFTscYhiv4a8OeLLxNgMZ7O9EBmik4gB2aXAlLh3N2-sgitCTBBCihIKPMXS30267pXyba7SMmQ&oh=066b1701b20d295d7d96ada5597f141a&oe=5B2EBBB5
     
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/29792527_1826514774079073_1522702515520549030_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEIgQSl_8K--a114zzKwMCbq6RHxPBTqUbZBhC3MMvg-ZAWQXaDHwg5LpIDUwGatqrB32FR6wmD4-NOlYL7ICmIMamCRygvXon2uj4P1HWMAQ&oh=f541eae4b0ba4535c99a5bdf2f7372a3&oe=5B68EAE4
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/29790461_1826514674079083_7009863008141727018_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEPjVHFOYLQ0-P6NqGRPaKguXXV2WNnQxjIU2CWfuYZBt7HDb5w2FnbON3IBUF92Z9s9INXVJojbt6fNUJOcE48sC-wpgXZHg3khdtQidMdbA&oh=6a7ee8d85b83b813a3a3fc1c2b2cbed8&oe=5B2CE67D
     
     
  9. Like
    Commander Klank got a reaction from SFC Snuffy in ISD-1 Modification from Mel's   
    Pro tip: It's the resin oil from uncured FUD material. They cure the stuff in ultra violet light after printing. This is not always 100% so let the parts sit in direct sun light for at least an hour or two... this cures the FUD resin all the way trough and sweats out any remaining oils from the material. Then wash the parts in simple green and rinse in hot water. 
    Trust me on this...
  10. Like
    Commander Klank got a reaction from Captain_Nemo in Nemesis Star Destroyer   
    From Revell ISD model.... top side construction...
    https://scontent-dfw5-1.xx.fbcdn.net/v/t31.0-8/29745081_1826514217412462_2853910105721409187_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeHc12xwgntXHAcMPkghPWC8y4A75ad8PIg1coqN4SKOZJMexKoNTwoYEx2Lr0_heSPcJiEFvfYTWrw_lWPlixhhTAmxMvWuPfVBkuoEKWol6w&oh=d5c2c8c89d6b3be5a73243879052bb5e&oe=5B632832
    https://scontent-dfw5-1.xx.fbcdn.net/v/t31.0-8/29749495_1826514377412446_7546833167886130094_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEZkXC3utOFfpixf_DrCMLAEd8Ml3xIfb7FFTscYhiv4a8OeLLxNgMZ7O9EBmik4gB2aXAlLh3N2-sgitCTBBCihIKPMXS30267pXyba7SMmQ&oh=066b1701b20d295d7d96ada5597f141a&oe=5B2EBBB5
     
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/29792527_1826514774079073_1522702515520549030_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEIgQSl_8K--a114zzKwMCbq6RHxPBTqUbZBhC3MMvg-ZAWQXaDHwg5LpIDUwGatqrB32FR6wmD4-NOlYL7ICmIMamCRygvXon2uj4P1HWMAQ&oh=f541eae4b0ba4535c99a5bdf2f7372a3&oe=5B68EAE4
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/29790461_1826514674079083_7009863008141727018_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEPjVHFOYLQ0-P6NqGRPaKguXXV2WNnQxjIU2CWfuYZBt7HDb5w2FnbON3IBUF92Z9s9INXVJojbt6fNUJOcE48sC-wpgXZHg3khdtQidMdbA&oh=6a7ee8d85b83b813a3a3fc1c2b2cbed8&oe=5B2CE67D
     
     
  11. Like
    Commander Klank got a reaction from cynanbloodbane in Nemesis Star Destroyer   
    Base model is the Star Wars™ SnapTite® Build and Play Imperial Star Destroyer by Revell
    https://www.revell.com/model-kits/entertainment/85-1638.html#.WsbaMGeouUk
    I use the bridge from Mels ISD 1 conversion kit. This bridge design and size was used on all Imperial ships ISD size or larger.
    https://www.shapeways.com/product/YLQ9P2PZ4/armada-imperial-star-destroyer-i-mod-kit?optionId=59918502
    allot of the turrets are from here...
    https://www.shapeways.com/shops/spacesupplydepot
    and here...
    https://www.shapeways.com/shops/einargosric
    Dome and other bits form here...
    https://www.shapeways.com/product/PXMTCRLJB/mulcien-ship-parts?optionId=42962753&li=ostatus
    Your around $100 with that stuff... 
    Here is my first ship the Leviathan class Star Destroyer Leviathan next to a ISD and a Victory . These ships are about 3200 meters 
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/16425882_1378291658901389_5582425903134458144_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEHUVtBw9LiMngKoUzcahPbVQWJwxfTtIAGbq34oTPq8Rt9Lhxt0Mc6vbBqnxgI9KZdDb_ESPK3VSVK4bj7CfiTRZD6x0LeYaoOdVkqshyGLQ&oh=f46fb28d93d81676e01cdace8af2d6c8&oe=5B693D8A
  12. Like
    Commander Klank got a reaction from cynanbloodbane in Nemesis Star Destroyer   
    From Revell ISD model.... top side construction...
    https://scontent-dfw5-1.xx.fbcdn.net/v/t31.0-8/29745081_1826514217412462_2853910105721409187_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeHc12xwgntXHAcMPkghPWC8y4A75ad8PIg1coqN4SKOZJMexKoNTwoYEx2Lr0_heSPcJiEFvfYTWrw_lWPlixhhTAmxMvWuPfVBkuoEKWol6w&oh=d5c2c8c89d6b3be5a73243879052bb5e&oe=5B632832
    https://scontent-dfw5-1.xx.fbcdn.net/v/t31.0-8/29749495_1826514377412446_7546833167886130094_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEZkXC3utOFfpixf_DrCMLAEd8Ml3xIfb7FFTscYhiv4a8OeLLxNgMZ7O9EBmik4gB2aXAlLh3N2-sgitCTBBCihIKPMXS30267pXyba7SMmQ&oh=066b1701b20d295d7d96ada5597f141a&oe=5B2EBBB5
     
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/29792527_1826514774079073_1522702515520549030_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEIgQSl_8K--a114zzKwMCbq6RHxPBTqUbZBhC3MMvg-ZAWQXaDHwg5LpIDUwGatqrB32FR6wmD4-NOlYL7ICmIMamCRygvXon2uj4P1HWMAQ&oh=f541eae4b0ba4535c99a5bdf2f7372a3&oe=5B68EAE4
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/29790461_1826514674079083_7009863008141727018_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEPjVHFOYLQ0-P6NqGRPaKguXXV2WNnQxjIU2CWfuYZBt7HDb5w2FnbON3IBUF92Z9s9INXVJojbt6fNUJOcE48sC-wpgXZHg3khdtQidMdbA&oh=6a7ee8d85b83b813a3a3fc1c2b2cbed8&oe=5B2CE67D
     
     
  13. Like
    Commander Klank got a reaction from cynanbloodbane in ISD-1 Modification from Mel's   
    Pro tip: It's the resin oil from uncured FUD material. They cure the stuff in ultra violet light after printing. This is not always 100% so let the parts sit in direct sun light for at least an hour or two... this cures the FUD resin all the way trough and sweats out any remaining oils from the material. Then wash the parts in simple green and rinse in hot water. 
    Trust me on this...
  14. Like
    Commander Klank got a reaction from EagleScoutof007 in Nemesis Star Destroyer   
    From Revell ISD model.... top side construction...
    https://scontent-dfw5-1.xx.fbcdn.net/v/t31.0-8/29745081_1826514217412462_2853910105721409187_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeHc12xwgntXHAcMPkghPWC8y4A75ad8PIg1coqN4SKOZJMexKoNTwoYEx2Lr0_heSPcJiEFvfYTWrw_lWPlixhhTAmxMvWuPfVBkuoEKWol6w&oh=d5c2c8c89d6b3be5a73243879052bb5e&oe=5B632832
    https://scontent-dfw5-1.xx.fbcdn.net/v/t31.0-8/29749495_1826514377412446_7546833167886130094_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEZkXC3utOFfpixf_DrCMLAEd8Ml3xIfb7FFTscYhiv4a8OeLLxNgMZ7O9EBmik4gB2aXAlLh3N2-sgitCTBBCihIKPMXS30267pXyba7SMmQ&oh=066b1701b20d295d7d96ada5597f141a&oe=5B2EBBB5
     
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/29792527_1826514774079073_1522702515520549030_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEIgQSl_8K--a114zzKwMCbq6RHxPBTqUbZBhC3MMvg-ZAWQXaDHwg5LpIDUwGatqrB32FR6wmD4-NOlYL7ICmIMamCRygvXon2uj4P1HWMAQ&oh=f541eae4b0ba4535c99a5bdf2f7372a3&oe=5B68EAE4
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/29790461_1826514674079083_7009863008141727018_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEPjVHFOYLQ0-P6NqGRPaKguXXV2WNnQxjIU2CWfuYZBt7HDb5w2FnbON3IBUF92Z9s9INXVJojbt6fNUJOcE48sC-wpgXZHg3khdtQidMdbA&oh=6a7ee8d85b83b813a3a3fc1c2b2cbed8&oe=5B2CE67D
     
     
  15. Like
    Commander Klank got a reaction from gounour in Nemesis Star Destroyer   
    From Revell ISD model.... top side construction...
    https://scontent-dfw5-1.xx.fbcdn.net/v/t31.0-8/29745081_1826514217412462_2853910105721409187_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeHc12xwgntXHAcMPkghPWC8y4A75ad8PIg1coqN4SKOZJMexKoNTwoYEx2Lr0_heSPcJiEFvfYTWrw_lWPlixhhTAmxMvWuPfVBkuoEKWol6w&oh=d5c2c8c89d6b3be5a73243879052bb5e&oe=5B632832
    https://scontent-dfw5-1.xx.fbcdn.net/v/t31.0-8/29749495_1826514377412446_7546833167886130094_o.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEZkXC3utOFfpixf_DrCMLAEd8Ml3xIfb7FFTscYhiv4a8OeLLxNgMZ7O9EBmik4gB2aXAlLh3N2-sgitCTBBCihIKPMXS30267pXyba7SMmQ&oh=066b1701b20d295d7d96ada5597f141a&oe=5B2EBBB5
     
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/29792527_1826514774079073_1522702515520549030_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEIgQSl_8K--a114zzKwMCbq6RHxPBTqUbZBhC3MMvg-ZAWQXaDHwg5LpIDUwGatqrB32FR6wmD4-NOlYL7ICmIMamCRygvXon2uj4P1HWMAQ&oh=f541eae4b0ba4535c99a5bdf2f7372a3&oe=5B68EAE4
    https://scontent-dfw5-1.xx.fbcdn.net/v/t1.0-9/29790461_1826514674079083_7009863008141727018_n.jpg?_nc_cat=0&_nc_eui2=v1%3AAeEPjVHFOYLQ0-P6NqGRPaKguXXV2WNnQxjIU2CWfuYZBt7HDb5w2FnbON3IBUF92Z9s9INXVJojbt6fNUJOcE48sC-wpgXZHg3khdtQidMdbA&oh=6a7ee8d85b83b813a3a3fc1c2b2cbed8&oe=5B2CE67D
     
     
  16. Like
    Commander Klank got a reaction from cynanbloodbane in Star Ship Razzle Dazzle cammo   
    It's the thought that counts, right and why not on "smaller big ships"?... Pattern is made painting base coat then taping over it and spraying the next color, rinse and repeat. 
     
    This ship is Mels 1/7000 Vindicator with a modified bridge (using BFG bits) a dual turbo-blaster turret added to the front for effect. It makes an excellent "light" class Star Destroyer. It will have a little more beef to than other ships of it's class.
     
    Base colors only for now.
  17. Like
    Commander Klank got a reaction from player2454571 in Star Ship Razzle Dazzle cammo   
    It's the thought that counts, right and why not on "smaller big ships"?... Pattern is made painting base coat then taping over it and spraying the next color, rinse and repeat. 
     
    This ship is Mels 1/7000 Vindicator with a modified bridge (using BFG bits) a dual turbo-blaster turret added to the front for effect. It makes an excellent "light" class Star Destroyer. It will have a little more beef to than other ships of it's class.
     
    Base colors only for now.
  18. Like
    Commander Klank got a reaction from SFC Snuffy in Star Ship Razzle Dazzle cammo   
    It's the thought that counts, right and why not on "smaller big ships"?... Pattern is made painting base coat then taping over it and spraying the next color, rinse and repeat. 
     
    This ship is Mels 1/7000 Vindicator with a modified bridge (using BFG bits) a dual turbo-blaster turret added to the front for effect. It makes an excellent "light" class Star Destroyer. It will have a little more beef to than other ships of it's class.
     
    Base colors only for now.
  19. Like
    Commander Klank got a reaction from RuusMarev in Star Ship Razzle Dazzle cammo   
    It's the thought that counts, right and why not on "smaller big ships"?... Pattern is made painting base coat then taping over it and spraying the next color, rinse and repeat. 
     
    This ship is Mels 1/7000 Vindicator with a modified bridge (using BFG bits) a dual turbo-blaster turret added to the front for effect. It makes an excellent "light" class Star Destroyer. It will have a little more beef to than other ships of it's class.
     
    Base colors only for now.
  20. Like
    Commander Klank got a reaction from cynanbloodbane in Armada scale Dreadnought class Star Destroyer   
    Just when you thought Leviathan  and its sister ship where  the bane of the rebellion along  comes project "Blue Bonnet" ...    the next generation Star Destroyer built on the concept of a massive ship designed to fight and destroy a fleets of smaller ships. The ship will be about 4000 meters armada SD scale. Zvezda Star Wars 9057 Imperial Star Destroyer 1/2700 scale model kit I just bought on E-bay.
    I ordered one today. 
     
     
     
  21. Like
    Commander Klank got a reaction from cynanbloodbane in Armada scale Dreadnought class Star Destroyer   
    LOL I was actually brain farting around with the idea of having the front detach form the rest of the ship to make a SD type escort ship... when the escort ship separates it exposes a huge hanger bay opening in the front making the larger rear section a strike carrier; imagine a gigantic Gladiator SD with an Imperial SD escort built into it.
    @gounourYeah, its like 23 inches long and will fit on a 4x6 table. It's moment will be 1 with 1 turn in it. Of course it would only be used in special games.  
  22. Like
    Commander Klank got a reaction from EagleScoutof007 in Armada scale Dreadnought class Star Destroyer   
    LOL I was actually brain farting around with the idea of having the front detach form the rest of the ship to make a SD type escort ship... when the escort ship separates it exposes a huge hanger bay opening in the front making the larger rear section a strike carrier; imagine a gigantic Gladiator SD with an Imperial SD escort built into it.
    @gounourYeah, its like 23 inches long and will fit on a 4x6 table. It's moment will be 1 with 1 turn in it. Of course it would only be used in special games.  
  23. Like
    Commander Klank got a reaction from GhostofNobodyInParticular in Armada scale Dreadnought class Star Destroyer   
    LOL I was actually brain farting around with the idea of having the front detach form the rest of the ship to make a SD type escort ship... when the escort ship separates it exposes a huge hanger bay opening in the front making the larger rear section a strike carrier; imagine a gigantic Gladiator SD with an Imperial SD escort built into it.
    @gounourYeah, its like 23 inches long and will fit on a 4x6 table. It's moment will be 1 with 1 turn in it. Of course it would only be used in special games.  
  24. Like
    Commander Klank got a reaction from eViL dAvE in Armada scale Dreadnought class Star Destroyer   
    Got the model today and it's going to be an awesome project.

    Next to my Leviathan class Star Destroyer  and an ISDII... it's about 6,000 meters.
     
    The front section is bigger that a ISD...LOL

    More to follow 
  25. Like
    Commander Klank got a reaction from Audio Weasel in Gosrics models   
    Here are some of his ships I've painted up....








     


     
     
×
×
  • Create New...