Jump to content



Photo

Adventure card racks


  • Please log in to reply
21 replies to this topic

#1 Artemise

Artemise

    Member

  • Members
  • 8 posts

Posted 07 March 2013 - 01:23 PM

Hello all,

I've been searching for a low cost, no craftsmanship necessary, solution for holding my ever-growing stack of adventure cards.  I came across these acrylic boxes (originally designed to hold sweetener packets).

Card racks

Card Rack

These are made by USAcrylic, but I actually found and bought them from Amazon for next to nothing.  Let me know what you think.  Any better solutions out there?  I've seen QRal's work, and those are certainly very sharp looking, but not as easy to get your hands on.

 

Link to the racks:

http://usacrylic.com/serveware.html



#2 Artemise

Artemise

    Member

  • Members
  • 8 posts

Posted 07 March 2013 - 01:30 PM

Let me try to get those photos attached again:

IMG_0003 compressed" />

IMG_0002 compressed" />


  • Quartzquiz likes this

#3 Artemise

Artemise

    Member

  • Members
  • 8 posts

Posted 07 March 2013 - 01:52 PM

Here are links to the photos if you care to view them:

http://www.flickr.co...N02/8536894279/

http://www.flickr.co...N02/8537998780/



#4 talismanisland

talismanisland

    Harbourmaster

  • Members
  • 1,921 posts

Posted 12 March 2013 - 05:48 AM

These look great! Did you go with the one size or did you get both?


Harbourmaster at Talisman Island - 15 magical years and counting!

Sometimes I even update the Talisman Island Facebook Page!

#5 Artemise

Artemise

    Member

  • Members
  • 8 posts

Posted 12 March 2013 - 10:18 AM

Thank you.  I went with the larger of the two sizes.  It measures 8.5"L x 5.5"W x 3.5"H.  One rack holds almost all of my adventure cards (base game, Reaper, Dungeon, Frost March, and Sacred Pool).  A simple divider helps me track our progression through the deck, and lets us know when we need to shuffle.

I use the second rack with dividers to hold Dungeon cards and spell cards.



#6 allawi

allawi

    Member

  • Members
  • 54 posts

Posted 13 March 2013 - 10:27 PM

This looks really good, can you please share the amazon link to where you bought it? I found several on amazon but none mentioned the size. 

Also, where did you get that black tray to place all other cards on? Like the alignment cards and purschase deck.

Let me know, 

 

best regards

allawi



#7 Artemise

Artemise

    Member

  • Members
  • 8 posts

Posted 14 March 2013 - 06:46 AM

Allawi,

 

Here is the Amazon link to the horizontal acrylic card holder:

http://www.amazon.co...=I2DL46RITIMYAS

 

This is a link to a vertical acrylic card holder I was eyeing.  Although the dimensions seem to fit, I did not purchase and test this one, so buyer beware.  If it works, it would also be really nifty:

http://www.amazon.co...=I3MYXM3PB5I56G

 

Lastly, here is the business card rack that you saw in my photo.  I has worked very nicely for us in handling the small stacks of cards (purchase deck, stables deck, alignment cards,…).  It is made by deflect-o:

http://www.amazon.co...=I3RG220M56RVJM

 



#8 Scrotilion

Scrotilion

    Member

  • Members
  • 1 posts

Posted 01 May 2014 - 10:07 AM

Those look great!

 

Did they change the Adventure card size in the revised 4th Edition? I'm still playing 4th Edition plain Jane.



#9 DomaGB

DomaGB

    Member

  • Members
  • 356 posts

Posted 01 May 2014 - 06:11 PM

$1 from the Dollar Tree

a pic of mine holding the cards:

http://boardgamegeek.../1911037/domagb

Dollar Tree source:

http://www.dollartre...roductId=296578

RoboRally, then Talisman. That's the way it is... ;)


#10 talismanamsilat

talismanamsilat

    Talisman Veteran

  • Members
  • 1,267 posts

Posted 02 May 2014 - 12:16 AM

They look like they're a dollar!

#11 DomaGB

DomaGB

    Member

  • Members
  • 356 posts

Posted 02 May 2014 - 06:15 PM

I think it was a pack of 3 for only $1. I like them, they work well. One rack holds my entire Adventure deck, tho I only use 1/3 of Blood Moon, and with the last expansion, its now almost full. I also sleeve my cards.


Edited by DomaGB, 02 May 2014 - 06:15 PM.

  • talismanisland likes this

RoboRally, then Talisman. That's the way it is... ;)


#12 Rigmaster

Rigmaster

    Member

  • Members
  • 45 posts

Posted 05 May 2014 - 06:26 AM

I use this box for storage.

 

http://www.biltema.s...mentlada-71739/

 

I bought it at Biltema, a swedish version of Walmart, for 99 Swedish crowns (around 13 USD, 11 EUR). It's originally made for storing screws, bolts, bricks etc. The cards fit perfectly in the boxes, and you can easily fit all dungeon cards and the adventure cards from the dungeon expansion in one box (to give you an idea of the size). The are nine boxes on each side and I have all cards on one side and all tokens on the other side. The boxes are easily removed from the black storage part and can be moved individually so I keep all tokens in the boxes when we play. although I've to remove cards and place them in piles on the table. I know that the picture ain't very good but if you're interested I can provide pictures when we have our next session.

 

Anyway, I have my game stored away in one big box (boards and rule books), 3 small boxes (1 for large cards; characters, quests, frog, reaper card etc, 1 for character minis and 1 for painted minis) and of course this storage box. Works perfectly and is easily transported.



#13 Felis

Felis

    Member

  • Members
  • 73 posts

Posted 12 May 2014 - 05:38 PM

Great find!

It never occured to me to use sweetener holders to keep talisman cards (and I was using those at work for years). As with many great discoveries it's obvious only after someone thought about it first ;)

I have to get some of these. Thanks for the tip.



#14 vslimm

vslimm

    Member

  • Members
  • 2 posts

Posted 21 July 2014 - 10:34 AM

I searched the internet for a long while looking at possible options and also considered a craft project to make my own. I happened to find an old golf ball rack that I used to use to display my logo golf balls that hangs on the wall. It is six by six and works perfect. I have every expansion and the only stack i need to double up so far are the alignment cards and talismans. I put the cards in vertically and most stacks lean back so you can see all deck faces at a glance. You can buys these for about 15 dollars, made out of wood and are about the same size as the large talisman boxes.

#15 Zozimus

Zozimus

    Member

  • Members
  • 304 posts

Posted 22 July 2014 - 06:20 AM

I've wanted to find a card shoe (a plastic or wooden device that dispenses one card at a time) that fits Talisman cards for years, with no luck.  They all seem to be made for playing cards of the standard casino size.  If anyone knows where to find such a thing, let me know.  


  • Quartzquiz likes this

Man is most nearly himself when he achieves the seriousness of a child at play. - Heraclitus


#16 Alfax

Alfax

    Member

  • Members
  • 21 posts

Posted 22 July 2014 - 08:17 PM

Personally I think FFG should make something like that to fit their cards. As well as a 6 to 8 deck electronic shuffler made to fit the smaller sized cards. They'd make a killing


  • Zozimus likes this

#17 TheMetal1

TheMetal1

    Member

  • Members
  • 24 posts

Posted 24 July 2014 - 09:00 PM

I stumbled upon the Dragon Shield Four Compartment Gaming Box at my FLGS.  3 of these should be able to handle the Main game and all the expansions with card sleeves on them.  I think with 3 this should be able to handle the woodlands expansion when it comes out.  

 

61l-3D6TJaL._SL1500_.jpg



#18 Zozimus

Zozimus

    Member

  • Members
  • 304 posts

Posted 25 July 2014 - 10:46 PM

Personally I think FFG should make something like that to fit their cards. As well as a 6 to 8 deck electronic shuffler made to fit the smaller sized cards. They'd make a killing

An adjustable card shuffler to fit all the various sizes of cards would be awesome.  Well, FFG?  :)


Man is most nearly himself when he achieves the seriousness of a child at play. - Heraclitus


#19 Kilazar

Kilazar

    Member

  • Members
  • 36 posts

Posted 28 July 2014 - 07:10 AM

I am thinking about trying this guy out

 

http://www.amazon.co...r packet holder

 

Has anyone seen this? Do you think it will fit? I don't know the dimensions for the small cards.

 

 

I also found this guy

http://www.amazon.co...r packet holder

 

He looks like he MIGHT work. Thoughts?

 

 

And has anyone tried this one yet?

http://www.amazon.co...=I3MYXM3PB5I56G

 

I think this one would be the most elegant solution for both storage and use while playing.


Edited by Kilazar, 28 July 2014 - 07:49 AM.


#20 Artemise

Artemise

    Member

  • Members
  • 8 posts

Posted 28 July 2014 - 11:31 AM

Hi Kilazar,

 

That 1st storage option is interesting.  Let me know if that works.

 

The 2nd one I took a pass on because it looks to me like the lid will not clear the tops of the cards.  I have not tested it personally, just my opinion from comparing one of those tea packets to a card.

 

The 3rd option is my favorite.  I had considered this one myself (see my 14 March 2013 posting above).  Again, I have not tested to see if the cards actually fit.  If it does, that would be a very elegant solution to drawing cards.






© 2013 Fantasy Flight Publishing, Inc. Fantasy Flight Games and the FFG logo are ® of Fantasy Flight Publishing, Inc.  All rights reserved.
Privacy Policy | Terms of Use | Contact | User Support | Rules Questions | Help | RSS